282480308@qq.com

+86-535-6276722

Product Categories

Contact Us

Address: No.18 Hangzhou Rd., Haiyang Development Zone, Haiyang 265100, China

TEL: +86-18354557330

Email: 282480308@qq.com

Home > Exhibition > Content
LC-604E Epoxy Resin Sep 02, 2016
Basic Info
  • Model NO.: LC-604E

  • Natural Resin: Resin

  • Molecular Principal Chain: Element Organic Polymer

  • Model Number: LC-604E etc

  • Einecs No.: 216-823-5

  • Type: Synthetic Resin and Plastics

  • Place of Origin: China (Mainland)

  • Nm: Wy

  • Specification: SGS/CIQ

  • HS Code: 3901100001

  • Synthetic Resin: Epoxy Resin

  • Characteristic: Thermoplastic Resin

  • Color: White

  • CAS No: 1675-54-3

  • Purity: 99%Min

  • Classification: Chemical Auxiliary Agent

  • Sampel: Supply Free

  • Trademark: QMN

  • Origin: China (Mainland)

Product Description

Specifications
1)It is solid epoxy resin
2)It is colorless flake solid epoxy resin.
3)Brand:Sinopec
4)used for powder coating


Epoxy Resin
1. Tough, hard film and high abrasion resistance.
2. Excellent resistance to mechanical damage.

TYPE

A two-pack, multipurpose epoxy finish coating based on Epoxy Resin.

USES

Topcoat for cement products, bridge, steel pipes, steel structure of factories.

CHARACTERISTICS

1. Tough, hard film and high abrasion resistance.
2. Excellent resistance to sea water.
3. Excellent resistance to mechanical damage.
4. Very good resistance to oil and mild chemicals

APPLICATION METHOD

Spray, Brush, Roller.

COLOR

Desired colors

FINISH

Gloss

SPECIFIC GRAVITY

Above 1.1 kg/L, depending on colors (Mixture)

VISCOSITY (25°C)

70 ~85 KU (Mixture)

DRYING TIME (25°C)

Set-to-touch
Dry hard
Fully cured

3 hrs.
24 hrs.
7 days.

OVERCOATING INTERVALS (25°C)

Min.
Max.

8 hrs.
5 days. (25°C) or 3 days. (30°C)

OPTIMUM FILM THICKNESS

Wet
Dry

100 microns
40 microns

VOLUME SOLIDS

Above 60%(Mixture)

THINNER

Epoxy Thinner

THINNING RATE

5 ~10 %(by wt.)

PRECEDING COATS

Epoxy Primer

STORAGE SHELF LIFE

Minimum 1 year under normal storage conditions.

MIXING RATIO

Base : Hardener = 5 : 1 (by wt.)

POT LIFE

8 hrs. (Mixture) (25°C)

NOTE

1. Mix base and hardener according to the mixing ratio and stir thoroughly.
2. Remove any soap, dust, rust, grease, old paint surface or any salt-containing
    chemicals before coating.
3. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly,
    a wet surface must be thoroughly dried
4. All equipment must be cleaned immediately after use.
5. When used inside tanks, sufficient ventilation must be provided.
6. When overcoating interval is exceeded, paint surface must be roughened to
    insure adhesion.
7. Coating surface would be chalking by sunshine.

Security Measures:
1. Store in a cool (temperature below 60°C), dry, well-ventilated and not direct sunlight place away from sorces of heat, and the ignition source of incompatibility.
2. To avoid eye and skin contact, careful operation, the importance of personal hygiene.
3. Wear safety glasses, clothes to wear anti-infiltration.
4. Eye contact, rinse with plenty of water.
5. Long-term exposure any cause allergy, combustion will produce toxic gases.
Fire Fighting: With froth, carbon dioxide, dried noodles